FAQ: How To Turn On Pilot Light For Majestic Vermont Dv360rp Fireplace?

How do I turn the pilot light on on my gas fireplace?

Lighting a Gas Fireplace With a Control Panel

  1. Turn the knob from the “Off” to the “Pilot” position.
  2. Push in the pilot knob, which manually sends gas into the system.
  3. Push the igniter button once every second until it lights.

How do you light the pilot on a Vermont Castings gas fireplace?

Turn knob on gas control counter-clockwise to “Pilot”. Push the control knob all the way in and hold. Immediately light the pilot by repeadedly depressing the piezo spark ignitor until a flame appears. Continue to hold the control knob in for about one (1) minute after the pilot is lit.

Why can’t I light the pilot light on my gas fireplace?

If gas is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple. The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says.

You might be interested:  Quick Answer: What Is The Capital City Of Vermont?

Should the pilot light always be on in a gas fireplace?

Should the pilot light always be on in a gas fireplace? Most gas fireplaces rely on a “continuous pilot light,” a type of pilot that remains lit so long as gas is flowing to the unit. If you have a continuous pilot light system, you should always see a pilot flame unless you have manually turned the system off.

Should I turn off the pilot light on my gas fireplace in the summer?

Perhaps the most important reason to turn off gas fireplace pilot light in summer is because of the money and energy you will be saving. If you leave the pilot light on during the summer it is simply sitting there burning gas, which is wasting gas and contributing to an exorbitant energy bill.

Can you manually light a gas fireplace with electronic ignition?

If your gas fireplace has an energy-saving, alternating pilot ignition system, it will need electricity to trigger the pilot flame every time the fireplace is used. If you have a wireless remote control, or a wall switch with a display, find the control box of the fireplace and switch to manual.

Does gas turn off when pilot goes out?

The pilot light provides a small flame that ignites the gas needed to operate the appliance. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out. The fail-safe device is comprised of a thermocouple.

Where is the pilot light on my fireplace?

Locate the gas control knob. Just above it, you should see a red or black push button, which means that the unit has a piezoelectric spark mechanism. Press the button once or twice to verify that there is a spark at the end of the pilot tube. If you don’t see a button, you must light the flame manually.

You might be interested:  Often asked: How Are Vermont Roads?

What do you do when your gas fireplace won’t turn on?

If your gas fireplace has an electronic ignition check or replace the fuse. While if it is on a breaker, turn the breaker all the way off and then back on again. Sometimes this is an easy way to fix a gas fireplace that won’t turn on.

Why will my gas fireplace not turn on?

Another common issue with ignition is a dirty pilot light orifice, caused by a buildup of soot and dirt. If you have successfully re-lit your pilot light, ensured that the orifice is clean, and the fireplace still refuses to ignite, there could be an issue with the thermopile, thermocouple or wiring.

How do I know if my gas fireplace is working?

A properly operating gas fireplace will have a safe and secure glass enclosure, will ignite without delay, have a clean blueish color flame and will vent properly out through a termination cap that is clear from debris or obstruction.

Leave a Reply

Your email address will not be published. Required fields are marked *